Our Products
ACRYLIC PRIMER
Exterior & Interior
Surface to be painted must be free from any chalking. All loose dirt, dust, rust & grease need to be completely rubbed off & removed with Emery paper 180 & wipe clean. Use 10% water to obtain brushing consistency if required, over thinning must be avoided.Apply with brush. Let the first coat be dried before final coat. Avoid paint application in direct sunlight to achieve better coverage. Consult to authorised Dealer for better performance of painting application.
ACRYLIC DISTEMPER
Surface to be painted must be free from any chalking. All loose dirt, dust, rust & grease need to be completely rubbed off & removed with Emery paper 180 & wipe clean.Use 10% water to obtain brushing consistency if required, over thinning must be avoided. Apply with brush. Let the first coat be dried before final coat. Avoid paint application in direct sunlight to achieve better coverage. Consult to authorised Dealer for better performance of painting application.
Royal Emulsion
Royal Emulsion the emulsion paint that provides aluxunous finish and silky glowing appearance to yourwall.Direction for use: Sand the surface with Emery paper 180 and wipe clean. Apply a coat of Royal water base primer and allow drying for 6-8 hours. Smoothen the surface by filling dents with thin coats of Royal acrylic putty and allow drying for 4-6 hours.Sand the surface with Emery paper 180 and wipe clean, apply another coat of primer and allow drying 6-8 hours. Sand the surface with Emery paper 320 and wipe clean. Thin 1 liter of Royal Emulsion with 400-450 ml. of clean water. Apply 2-3 coats of paint with an interval of 3-4 hours between successive coats.
Royal Glassy Emulsion
Royal Glassy Emulsion the emulsion paint that provides aluxunous finish and silky glowing appearance to your wall. Direction for use: Sand the surface with Emery paper 180 and wipe clean. Apply a coat of Royal water base primer and allow drying for 6-8 hours. Smoothen the surface by filling dents with thin coats of Royal acrylic putty and allow drying for 4-6 hours. Sand the surface with Emery paper 180 and wipe clean, apply another coat of primer andallow drying 6-8 hours. Sand the surface with Emery paper 320 and wipe clean. Thin 1 liter of Royal Emulsion with 400-450 ml. of clean water. Apply 2-3 coats of paint with an interval of 3-4 hours between successive coats.
ACRYLIC
EMULATION EXTERIOR & INTERIOR
Clean the surface thoroughly, removing al grease, Oil, Salt, fungus loose flaking particles. Sandpaper to smoother the surface. New plaster should have matured for about three months before painting. Crome Acrylic Distemper is supplied in paste form. Thin down by adding 1.5 to 2 parts of water to 3 parts distemper by weight to, obtain correct application consistency. Apply 2 to 3 coats of paint with an interval of 6-8 hours between coats.
Crome Acrylic Emulsion
Crome Acrylic Emulsion the emulsion paint that provides aluxurious finish and silky glowing appearance to your wall. Direction for use: Sand the surface with Emery paper 180 and wipe clean. Apply a Coat of Crome water base primer and allow drying for 6-8 hours. Smoothen the surface by filling dents with thin coats of Crome acrylic putty and allow drying for 4-6hours. Sand the surface with Emery paper 180 and wipe clean, apply another coat of primer and allow drying 6-8 hours. Sand the surface with Emery paper 320 and wipe clean. Thin 1 liter of Crome Acrylic Emulsion with 400-450 ml.of clean water. Apply 2-3 coats of paint with an interval of 3-4 hours between successive coats.
ACRYLIC
PRIMER EXTERIOR & INTERIOR
Surface to be painted must be free from any chalking. All loose dirt, dust, rust & grease need to be completely rubbed off & removed with Emery paper 180 & wipe clean. Use 10% water to obtain brushing consistency if required, over thinning must be avoided. Apply with brush. Let the first coat be dried before final coat. Avoid paint application in direct sunlight to achieve better coverage. Consult to authorised Dealer for better performance of painting application.